Random IT Tidbits

The following website has some tips on the clock drifting inside Trixbox on Esxi.

http://www.trixbox.org/forums/trixbox-forums/help/clock-drift-trixbox-vm-vmware-esxi

Callback took a bit of work to get working.
1. Had to install Ruby on my trixbox machine. Did a yum install ruby.
2. Had to backup my old callback config. Did a mv /var/lib/asterisk/bin/callback /var/lib/asterisk/bin/callback.original
3. Had to download a script from http://wiki.github.com/jsgoecke/freepbx_callback and then extrack ‘callback’ to /var/lib/asterisk/bin
4. Had to set permissions on the script by doing chmod +x /var/lib/asterisk/bin/callback
5. Had to add the following parameters to /etc/amportal.conf
CALLBACK_PREFIX=
CALLBACK_CLI=Callback
CALLBACK_RETRY=1
CALLBACK_INTERVAL=10
CALLBACK_WAIT=30
6. Had to re-read the configs.

That was it. Now my callback works PERFECTLY!! Hope this helps someone!
This is all taken from this link http://wiki.github.com/jsgoecke/freepbx_callback

I wanted to write my own PHP script to get CDR information out of Trixbox’s Mysql database. Find out a handy command that lets me define a user to login remotely to Trixbox’s Mysql specifying an IP Address. The command is

GRANT ALL PRIVILEGES ON *.* TO USERNAME@IP IDENTIFIED BY “PASSWORD”

Got this information from this website

http://help.hardhathosting.com/question.php/87

Hope this helps someone!

Two resources which helped me set up Raid Rebuild, Raid Email Monitoring and to simulate a Raid Failure to get an Email Notification are the following websites:-

1. http://ubuntuforums.org/showthread.php?t=1185134

2. http://linux-raid.osdl.org/index.php/Detecting,_querying_and_testing

For my Trixbox 2.8.0.2 these are the general steps that I took:-

Made sure there was my ISP’s SMTP server in Settings -> General Settings

Opened up the file /etc/mdadm.conf using vi /etc/mdadm.conf

Then I modified the line MAILADDR root to MAILADDR my@email.com

Then I added the line MAILFROM fromemail@email.com

Save and close mdadm.conf

run

mdadm --monitor --scan --test --oneshot

You should get an email with a subject that says Test Message Event on /dev/something

Then I ran

mdadm --monitor --scan --daemonize --test --syslog

and that was it!! Now whenever there is a failure of any one of the drives in my trixbox I get an email telling me so!!

To simulate a failure to test it out follow the instructions on the second link I provided at the top. It has detailed instructions on how to do a software raid failure test!

Hope this helps someone!

Love this website…shows so many commands that you need from day to day when administrating a trixbox!

http://myspacefears.com/trixbox/

To install using software raid you need two sata drives. Start the install by doing sataraid at the install prompt. Command to see how raid is working you need to enter cat /proc/mdstat at the command prompt once the install is done.

Various raid commands can be figured out using mdadm –help at the command prompt

Couldn’t figure this one out till I actually logged of the Admin Website. Every time an update was displayed on the webpage I would get

== Manager ‘admin’ logged on from 127.0.0.1
== Manager ‘admin’ logged off from 127.0.0.1

in the Asterisk CLI. Very annoying. Now I just keep my browser pointed to extensions where there are no updates.